6202 Bearing Dimensions in MM
Looking for precise measurements of the 6202 bearing? You're in the right place. The 6202 bearing, a popular deep groove ball bearing, is commonly used in various applications due to its robust design and excellent load-carrying capacity. It's crucial to understand its dimensions, especially when it comes to replacement or integrating it into new projects.
Whether you're an engineer, maintenance professional, or simply curious, this comprehensive guide will provide you with the essential 6202 bearing dimensions in millimeters (mm), along with detailed explanations and examples.
The 6202 Bearing Dimensions Overview
The 6202 bearing is a single row, deep groove ball bearing with a contact angle of 15°. It's designed to handle both radial and axial loads and is particularly suitable for high-speed applications. Let's dive into its key dimensions.
Before we proceed, bear in mind that the dimensions provided are typical values and might vary slightly depending on the specific manufacturer and bearing quality.
Outer Diameter (OD)
The outer diameter (OD) or outside diameter is the largest diameter of the bearing, measured from one outer ring edge to the other through the center.
For a 6202 bearing, the typical outer diameter is 40 mm. This means the diameter of the bearing's outer ring is 40 mm.
Inner Diameter (ID)
The inner diameter (ID) or bore diameter is the smallest diameter of the bearing, measured from one inner ring edge to the other through the center.
In a 6202 bearing, the inner diameter is usually 15 mm. This dimension is crucial when mounting the bearing on a shaft.
Width (B)
The width (B) or breadth of the bearing is the axial dimension, measured from one side of the bearing to the other, including the seals (if present).
For the 6202 bearing, the standard width is approximately 16 mm. This dimension can slightly vary depending on the specific bearing quality or manufacturer.
6202 Bearing Load Ratings and Speeds
While not direct dimensions, load ratings and maximum speeds are essential aspects to consider when selecting a 6202 bearing.
As per the international ISO standard, the basic static load rating (C0) for a 6202 bearing is approximately 3630 N, and the basic dynamic load rating (C) is around 908 N. These values indicate the bearing's resistance to static and dynamic loads respectively.
Radial Internal Clearance (C3)
The radial internal clearance (C3) is a tolerance indicating the loosest interference fit between the shaft (or hub) and the bearing's inner ring.
For a 6202 bearing, the radial internal clearance typically fall within the range of 50 to 90 μm, provided by the manufacturer as a standard.
Maximum Operating Speed (N)
The maximum operating speed (N) is the limit at which the bearing can safely operate without causing excessive grinding or overheating.
The maximum operating speed for a 6202 bearing is usually around 30,000 rpm. However, this can vary depending on factors such as load, lubrication, and operating conditions.
Now that you're familiar with the 6202 bearing dimensions and key performance aspects, you're well-equipped to make informed decisions about selection, mounting, and maintenance. Always refer to the manufacturer's guidelines for the most accurate information tailored to their specific products.
Happy engineering! If you have any further questions or need assistance with other bearing dimensions, feel free to explore our extensive article collection or reach out to our knowledgeable support team.