Borgeson Steering Box Exploded View: Disassembly Guide
The ominous sound of metal grinding woke John from his nap. He immediately recognized it as his Borgersen steering box on the fritz again. As a classic car enthusiast, he was no stranger to such noises, but this time it was louder, more urgent. Upon inspection, he found the steering box's top cover was completely blown off, clear evidence of an explosion.
John had always known that Bosch and Borgersen steering boxes were reliable, but even the most robust mechanisms can fail under heavy use or improper maintenance. He hypothesized that a seized sector gear or a worn-out pittman arm could have caused the catastrophic event. To confirm his suspicions and repair the damage, he decided to disassemble the steering box.
Exploded View of Borgersen Steering Box
Before diving into the nitty-gritty of the repair, John realized he needed a visual reference of the steering box's internal components. A well-defined exploded view would make the disassembly and reassembly process much smoother. He found one in his garage manual, and it looked like this:
Key Components of Borgersen Steering Box
A close study of the exploded view revealed the following main parts:
- Top Cover: The protective casing that houses the internal components.
- Steering Gear: The heart of the steering box, consists of idler gears and sector gear.
- Pinion: The input shaft that drives the steering gear.
- Pittman Arm: Translates the steering movement to the tie rod.
- Dowels & Bearings: Ensure smooth rotation of the components.
Potential Points of Failure
Armed with the knowledge of the steering box's anatomy, John could now pinpoint the likely causes of the explosion:
The sector gear and pittman arm are the most common culprits. The sector gear, under heavy loads, can wear out, seize, or even fracture. Similarly, the pittman arm can shear off or break due to excessive pressure or impact. In some cases, inadequate lubrication or contaminants can also cause failure in these components.
Steering Box Disassembly and Inspection
John began the grueling task of disassembling the steering box. As he removed each component, he inspected it meticulously for signs of wear, damage, or corrosion:
Top Cover and Dowels
Upon removal, John found the top cover completely fractured, confirming his explosion hypothesis. The associated dowels were also damaged and would need to be replaced.
Steering Gear and Pittman Arm
Upon closer inspection, the sector gear was indeed showing signs of excessive wear, with grooves visible on the teeth. The pittman arm, however, was still in decent shape, with no visible signs of damage.
John realized that while the pittman arm might not have caused the explosion, it was showing signs of aging. He decided to replace both the sector gear and pittman arm as a precautionary measure. Replacing only the worn-out sector gear might only delay the inevitable failure, increasing the risk of another, potentially more catastrophic explosion.
Reassembly and Continued Maintenance
Armed with new components, John began the reassembly process, ensuring that everything was greased and aligned properly. He followed the exploded view diagram meticulously, double-checking each step to ensure nothing was amiss.
Regular Maintenance Tips
To prevent future incidents, John decided to implement a more stringent maintenance regimen:
- Regular lubrication of the steering box.
- Periodic inspection of the steering gear and pittman arm for signs of wear.
- Prompt addressing of any unusual noises or vibrations in the steering system.
As he wiped the steering box clean, John felt a sense of accomplishment. He had not only stabilized his classic car but also acquired a new skill. The next time the steering box sputtered, he would be ready. Until then, he would make sure his car got the care it deserved.