DIY: Easy Longboard Wall Mount - Hang & Store in Minutes
Ever admired the sleek lines of your longboard but struggled to find a suitable place to store it? Instead of letting it clutter your space or lean it precariously against a wall, consider creating a DIY longboard wall mount. Not only does this keep your board safely out of the way, but it also turns it into a stylish wall decoration. Here's a step-by-step guide to create your own, using simple materials and tools.
Before we dive into the details, let's talk about the benefits of a DIY longboard wall mount. Firstly, it saves space, which is crucial in compact homes. Secondly, it keeps your board visible, allowing you to appreciate its design. Lastly, it's a great conversation starter - who wouldn't want to know how you made your unique wall mount?
Materials Needed
Creating a DIY longboard wall mount requires minimal materials. You'll need:
- Wood planks (according to your design preference)
- Wood glue
- Screws (appropriate length for your wall material)
- Sandpaper (fine grit)
- Finishing varnish (optional)
- Wall anchor screws (appropriate for your wall material)
- Drill and driver set
- Tape measure
- Pencil
- Jigsaw or circular saw
Design Your Wall Mount
Before you start cutting and drilling, sketch out your design. You can opt for a simple ledge, a holder with a cradle for the deck, or a more creative design like a surfboard-inspired wall mount. Consider the width and length of your longboard to ensure a secure fit.
Cut the Wood Pieces
Once you've finalized your design, cut your wood planks according to the measurements. Be sure to wear safety gear, including goggles and gloves, when using power tools. For a basic ledge, you'll need two main pieces: one for the base and one for the lip that holds the board. For a cradle-style mount, you'll need additional pieces to support the deck.
Assemble the Wall Mount
Now that you have all your pieces, it's time to assemble your wall mount.
Glue the Pieces Together
Apply wood glue to the edges of the pieces that will be joined. If your design includes angled cuts, ensure you apply glue to both contacting surfaces. Clamp the pieces together and let the glue dry according to the package instructions.
Sand and Finish the Mount
Once the glue is dry, use sandpaper to smooth any rough edges or surfaces. If you'd like a finished look, apply varnish or paint. Allow the finish to dry completely before installing the mount on the wall.
Installing the Wall Mount
With your wall mount ready, it's time to install it on your wall. Before you start drilling, ensure your mount is level and mark the locations for your screws.
Use Appropriate Wall Anchors
To ensure your mount is securely attached to the wall, use wall anchors appropriate for your wall material. For drywall, use toggle bolts or expanding anchors. For concrete or brick walls, use masonry screws with wall plugs.
Drill the Holes and Attach the Mount
Using a drill, create pilot holes at the marked locations. If you're using anchors, insert them into the holes before screwing in the screws. Finally, attach the wall mount using the pilot holes, ensuring it's level and secure.
With your DIY longboard wall mount complete and installed, you can now admire your board while keeping it safely off the ground. Not only does this give your space a unique touch, but it also makes grabbing your board quick and easy the next time you're headed to the skatepark. Happy riding!