making a sam maloof rocking chair

Mastering Sam Maloof's Classic Rocking Chair: Step-by-Step Tutorial

By Thomas Robinson
AD

If you're a DIY enthusiast or simply looking to craft a timeless piece of furniture, you're in the right place. This guide will walk you through the process of making a Sam Maloof rocking chair, a classic design that's both functional and beautifully aesthetic. With a bit of patience, the right tools, and quality materials, you too can create a masterpiece that will be admired and used for generations.

First introduced in the 1940s, Sam Maloof's rocking chair has become an American classic. Its simplicity, comfort, and craftsmanship have made it a favorite among furniture aficionados. While the original design might seem intimidating to reproduce, with the right approach, anyone can make their own version of this iconic piece.

Gathering Your Materials and Tools

Before you start, ensure you have all the necessary materials and tools. You'll need quality hardwood, such as cherry or maple, for the frame and seat. Also, prepare your workspace, making sure it's well-lit and equipped with essential tools like a saw, drill, router, and a good selection of clamps.

AD
a wooden rocking chair with the words building an elegant rocking chair
a wooden rocking chair with the words building an elegant rocking chair
Sam Maloof
Sam Maloof
custom wooden rocking chairs — The Sam Maloof arm trick, by cutting then...
custom wooden rocking chairs — The Sam Maloof arm trick, by cutting then...

Also, gather your hardware. This includes rockers, screws, dowels, and finish of your choice. Remember, quality materials and hardware will yield a better result. So, don't skimp on these.

Selecting Your Wood

Choosing the right wood is crucial. Cherry and maple are popular choices due to their durability and aesthetic appeal. Remember, the seat and back will take the most beating, so ensure you use strong, hard wood for these parts.

Free Class Manual for a custom rocking chair in the...
Free Class Manual for a custom rocking chair in the...
Sam Maloof Style Rocking Chair
Sam Maloof Style Rocking Chair
a blueprinted drawing of a rocking chair with instructions on the back and sides
a blueprinted drawing of a rocking chair with instructions on the back and sides

Also, consider the wood's grain direction. It's best to have the grain running parallel to the direction of the rocker to give the chair maximum strength.

Cutting the Wood

Once you've selected your wood, it's time to cut it to size. Start with the seat. The original design's seat is 18" long x 19" wide, but you can adjust this based on your comfort.

AD

The back consists of two curved pieces. It's here where the use of a router comes in handy. Create a template for the curve and use it to guide your router for a consistent cut.

Sam Maloof: How I Make A Rocker - FineWoodworking
Sam Maloof: How I Make A Rocker - FineWoodworking
Sam Maloof: 1916-2009 - FineWoodworking
Sam Maloof: 1916-2009 - FineWoodworking
cut out pieces of paper sitting on top of a wooden floor
cut out pieces of paper sitting on top of a wooden floor
a rocking chair made out of wicker on a white background with no people around it
a rocking chair made out of wicker on a white background with no people around it
Sam Maloof Style Rocking Chair
Sam Maloof Style Rocking Chair
A Sam Maloof Inspired Rocking Chair; Walnut Rocker #2 by...
A Sam Maloof Inspired Rocking Chair; Walnut Rocker #2 by...

Assembling the Rockers

The rockers are the most crucial part of the chair. They need to be strong and perfectly symmetrical to ensure the chair rocks smoothly.

Start by cutting the rockers to size. Maloof's original design uses rockers 19" long, with a rise of 4" at the front and 2" at the back. Use your router to create the curve along the length of the rockers. Again, use a template for consistency.

AD

Carving the Curve

To create the curve, start by marking the centerline of the rocker. Then, use a router with an edge guide to carve out the waste wood, following the curve marked on your template. Take your time, and make sure to work in small increments to avoid overcutting.

How to Make a Maloof Joint | Popular Woodworking
How to Make a Maloof Joint | Popular Woodworking

Attaching the Rockers

Once your rockers are carved and the curve is smooth, it's time to attach them. Drill holes through the seat and into the rockers. Use strong dowels and wood glue to secure the rockers in place. Ensure the centerline of the seat is perfectly aligned with the centerlines of the rockers.

Building the Back

The back of the chair is composed of two curved pieces with flat top and bottom pieces.

AD

Creating the Curved Pieces

Use the same method as the rockers to create the curve on the back pieces. Ensure they are identical for a symmetrical look.

Once carved, attach the top and bottom flat pieces using dowels and glue. Make sure these are flush with the top and bottom of the curved pieces.

Attaching the Back to the Seat

Position the back on the seat, ensuring it's centered. Drill holes through the seat and into the back. Use dowels and glue to secure the back to the seat.

Finishing Touches

Now that the structure is complete, it's time to sand and finish your chair. Start with coarse sandpaper, then work your way up to fine grit for a smooth finish.

For the finish, Maloof used Danish oil. Cabinet grade lacquer or varnish can also work well. Apply the finish according to the manufacturer's instructions, allowing each coat to dry completely before sanding lightly and applying the next.

Once the finish is completely dry, your Sam Maloof rocking chair is ready to use and enjoy. Each time you sit, remember the skill and patience that went into crafting this timeless piece. Don't be surprised if your friends and family start requesting their own Maloof replicas!

AD