military flag display case dimensions

Military Flag Display Case Dimensions

By Rachel Jones
AD

Military flag display cases are an integral part of honoring veterans, celebrating victories, and preserving history. It is crucial to find a case that fits your space and shows off your flag in its best light. Dimensions, therefore, need careful consideration, depending on your flag type, size, and case location.

First, let's understand the most common flag sizes. Standard flags range from 3x5 to 5x8 feet. Custom flags can vary in size. Therefore, your display case must accommodate these dimensions comfortably to prevent cramping or tears.

Standard Flag Cases

For standard flag sizes, the dimensions usually vary between 3.5 to 5.5 feet in width and 5 to 8 feet in height. Remember, width matters for the flag itself, while height accommodates the pole and any additional hardware.

AD
Flag Display Case Plan For Mantel or Wall Hanging
Flag Display Case Plan For Mantel or Wall Hanging
the diagram shows how to make a boat out of plywood and other woodworking materials
the diagram shows how to make a boat out of plywood and other woodworking materials
Flag Display Case Plan For Mantel or Wall Hanging
Flag Display Case Plan For Mantel or Wall Hanging

When measuring, ensure you account for the flag pole, which usually measures 1 to 1.5 inches in diameter. Also, consider leaving some space (about 1-2 inches) for easy flag retrieval and to allow air circulation, preventing moisture build-up that could damage the flag.

Flag Size and Case Width

The flag's width significantly impacts the case width. For instance, a 3x5 ft. flag typically fits into a case ranging from 3.5 to 4 ft. wide. A 5x8 ft. flag would require a case of around 5-6 ft. in width.

an image of a wooden structure with measurements for the roof and side walls, including the top
an image of a wooden structure with measurements for the roof and side walls, including the top
What to do with a Military Funeral Flag
What to do with a Military Funeral Flag
Display Case for a Military Honors Flag
Display Case for a Military Honors Flag

To avoid frequent replacements due to wear and tear, consider allowing some leeway in width. A case a bit wider than your flag provides ample room for movement and adjustability.

Pole and Case Height

Your flag's pole needs around 1.5 to 2 feet of extra space above the flag itself. If your case is wall-mounted, also consider the area around the pole that might be exposed to weather elements.

AD

Including this extra space, and adding a bit more for safety, a typical case height for a standard flag is around 6 to 8 feet. If you're displaying multiple flags, or bigger, outdoor flags, the height can vary but usually starts from around 8 feet and goes up.

How to make a flag case with one board....
How to make a flag case with one board....
Display Case for a Military Honors Flag
Display Case for a Military Honors Flag
Memorial Flag Case Plans | Make Veteran Flag Display Case
Memorial Flag Case Plans | Make Veteran Flag Display Case
FLAG DISPLAY CASE PLANS
FLAG DISPLAY CASE PLANS
Custom Wood Shadow Boxes and Flag Display Cases
Custom Wood Shadow Boxes and Flag Display Cases
Custom Wood Shadow Boxes and Flag Display Cases
Custom Wood Shadow Boxes and Flag Display Cases

Custom and Oversized Flags

Custom and oversized flags can present an extra challenge when determining your case's dimensions. Measure your flag carefully, including its finial (the decorative top of the pole), as larger flags can require custom, large-scale cases.

Oversized flags also need sturdy, high-quality materials to avoid warping, sagging, or improper display. Consult with a professional flag installer or manufacturer to determine the ideal dimensions for your custom case.

AD

Allowable Space for Accessories

Many military flags are paired with accessories like tassels, fringe, or cords. Make sure your case allows for these extra elements. They might require an extra inch in width or height, or even additional mounting hardware.

Flag Display Case
Flag Display Case

Furthermore, consider the case's depth. Thick, double-sided flags, or flags with heavy'embroidery may need extra depth for a comfortable display.

TLR-072 Dimensions and More

The TLR-072 is a popular military flag case, measuring 65 inches (height) by 40 inches (width) by 6 inches (depth). This case is designed for 3x5 ft. flags and comes with or without a pole.

AD

Other popular models include the 'Wall-mount Flag Display Case', typically for larger flags (5x8 ft. and up), and the 'Freestanding Flag Display Case', suitable for display areas with enough space.

When investing in a military flag display case, remember, the dimensions are just one factor. Consider the case's material, construction, and any specific requirements your flag might have. A well-documented, thought-out purchase results in a professional, eye-catching display that lasts.

AD