minn kota terrova mounting instructions

Minn Kota Terrova Mounting Instructions

By John Taylor
AD

If you're a passionate angler looking to upgrade your boat with a Minn Kota Terrova, you'll首先 need to follow the proper mounting instructions to ensure a secure and effective installation. This guide will walk you through the process, from understanding the components to tighten bolts and secure the motor to your transom. Let's dive in and make sure your Terrova is ready to help you find that next big catch.

Before we begin, gather your tools: a crescent wrench, a ratchet and sockets, a screwdriver, and some towels. Also, make sure your boat is properly supported and stable to prevent tipping during the installation process.

Understanding Your Minn Kota Terrova

Before we mount the Terrova, let's familiarize ourselves with the components. The Terrova is an i-Pilot GPS trolling motor, featuring Spot-Lock for precise boat positioning and AutoPilot for effortless navigation. It comes with a Bclamp bracket for easy mounting and a quick-release mechanism for convenient removal when not in use.

AD
Installing Advanced GPS On Your Minn Kota Terrova // DIY UPGRADE
Installing Advanced GPS On Your Minn Kota Terrova // DIY UPGRADE
Trolling Motor Setup - How to set up your Minn Kota Ulterra and Terrova
Trolling Motor Setup - How to set up your Minn Kota Ulterra and Terrova
Extend the Life of Your Minn Kota Trolling Motor: Essential Maintenance - Urban Splatter
Extend the Life of Your Minn Kota Trolling Motor: Essential Maintenance - Urban Splatter

Check your Terrova package to ensure you have all the necessary parts, including the motor, bracket, foot pedal, and any additional accessories like the i-Pilot handheld remote or BlueTooth connectivity kit.

Preparing the Transom

Inspect your boat's transom and ensure it's clean and damage-free. Any cracks or warping could compromise the motor's stability. If needed, reinforce the transom using fiberglass or a sturdy wooden board, and ensure it's level and smooth.

Must-Have Features Of The Minn Kota Edge
Must-Have Features Of The Minn Kota Edge
Minn Kota Terrova Battery and Charger installation Crooked Pilothouse boat Trolling Motor
Minn Kota Terrova Battery and Charger installation Crooked Pilothouse boat Trolling Motor
a fish pro trophy boat in the water with text overlaying it's image
a fish pro trophy boat in the water with text overlaying it's image

Measure and mark the center of the transom where the motor's center line should align. This will help you Position the motor properly and ensure even weight distribution.

Installing the Bracket

Place the Bclamp bracket on the transom, centering it over the mark you made earlier. Trace the bracket's four bolt holes, then remove the bracket. Drill pilot holes at your traced marks to avoid cracking the transom.

AD

Using the supplied hardware, attach the bracket to the transom. Ensure the bolts are snug but not overtightened. Tightening too much can cause the transom to crack, while too little can result in a loose motor.

12 Volt Minn Kota Trolling Motor Wiring Diagram
12 Volt Minn Kota Trolling Motor Wiring Diagram
Lakeside Marine & Service Minn Kota Terrova Saltwater Center Housing & Shaft (Tube) Assembly, 112 LBS (36V) / 2014-2016 / Up to 60"
Lakeside Marine & Service Minn Kota Terrova Saltwater Center Housing & Shaft (Tube) Assembly, 112 LBS (36V) / 2014-2016 / Up to 60"
Minn Kota Traxxis 55 Transom Mount Trolling Motor
Minn Kota Traxxis 55 Transom Mount Trolling Motor
Minn Kota 1358894, Terrova, 80 60\
Minn Kota 1358894, Terrova, 80 60\
Minn Kota iPilot Trolling Motor Review and Cool Features!
Minn Kota iPilot Trolling Motor Review and Cool Features!

Mounting the Minn Kota Terrova

Now that the bracket is securely in place, it's time to mount the Terrova motor. First, ensure the motor's shaft is fully lowered to make handling it easier.

Position the motor on the bracket, ensuring the center line aligns with the mark on your transom. Lower the motor's foot into the bracket and secure it using the quick-release pin. This allows the motor to be tilted up vertically when not in use.

AD

Securing the Motor

With the motor on the bracket, align the four holes on the motor's base with the holes in the bracket. Use the supplied hardware to secure the motor to the bracket, starting with the top two bolts and working your way down.

Tighten the bolts gradually, alternating sides, to ensure even pressure and a secure fit. Be careful not to overtighten, as this can strip the threads and damage the motor or bracket. Consult your Minn Kota Terrova owner's manual for recommended torque values.

Installing the Foot Pedal

Locate the foot pedal, which controls the motor's direction and speed. Attach the foot pedal cable to the motor's control box, ensuring the connectors match. Push the cable gently into the connector until you hear it click into place.

AD

Position the foot pedal where it's comfortable for you to operate while fishing. Secure it to the boat's floor using the provided hardware. Ensure the cable is routed safely, away from areas where it could be damaged or snagged.

Testing Your Minn Kota Terrova

Before you take your boat out for a spin, test the Terrova's functionality to ensure everything is working correctly. Lower the motor fully into the water, then engage the foot pedal.

Test the forward, reverse, and steering capabilities. If you've equipped your Terrova with i-Pilot, test the Spot-Lock and AutoPilot features to ensure they're functioning as expected. If anything feels off, double-check your connections and bolts to ensure they're secure and tight.

With your Minn Kota Terrova securely mounted and tested, you're ready to hit the water and explore new fishing grounds with confidence. Always remember to follow safe boating practices and maintain your motor regularly to ensure longevity and optimal performance. Happy fishing!

AD