tracker atv battery replacement

ATV Battery Replacement: A Step-by-Step Guide for Your Tracker

By John Miller
AD

When you're out in the rugged terrain on your trusty ATV, the last thing you want to deal with is a draining battery. To keep your adventures going, it's crucial to know how to replace the battery in your Tracker ATV. In this guide, we'll walk you through a step-by-step process, ensuring you're back on the trail in no time.

First things first, understanding your Tracker ATV's battery type. Tracker ATVs typically use deep-cycle lead-acid batteries, designed to handle repeated use. When it's time for a replacement, you'll likely be looking at an 8Ah or 10Ah battery, depending on your ATV model.

Understanding Your Tracker ATV's Battery

Prior to any replacement, it's essential to familiarize yourself with your ATV's battery. This will help you anticipate any future issues and ensure you get the right replacement.

AD
12V ATV Battery Won’t Start? Check This!
12V ATV Battery Won’t Start? Check This!
How Do ATV Batteries Charge + Video
How Do ATV Batteries Charge + Video
How To Install an ATV Battery
How To Install an ATV Battery

Tracker ATV batteries are usually 12-volt lead-acid batteries, either wet or sealed maintenance-free types. They're designed to handle the high starting currents required by your ATV's engine, as well as powering your lights, dashboard, and accessories.

Identifying the Battery's Amperage

Determining your battery's amperage is straightforward. It's often marked on the battery itself in Ah (Amp-hours). This rating indicates the battery's capacity to deliver power. Most Tracker ATV batteries are between 8Ah and 10Ah.

TECH: LITHIUM BATTERIES
TECH: LITHIUM BATTERIES
How Do Batteries Work? A Comprehensive Guide to ATV and UTV Batteries | SuperATV Off-Road Atlas
How Do Batteries Work? A Comprehensive Guide to ATV and UTV Batteries | SuperATV Off-Road Atlas
The Perks of 24-Hour Motorbike Battery Replacement
The Perks of 24-Hour Motorbike Battery Replacement

Higher amperage batteries typically last longer between charges, making them ideal for frequent riders or those traveling long distances off-road.

Visually Inspecting Your Battery

Before procuring a new battery, inspect your existing one for any signs of damage or wear. Check for corrosion on the terminals, cracks in the case, or leaks from a wet battery.

AD

If your battery shows signs of damage, it's time for a replacement. A clean battery with no visible damage usually means it's in good working condition, but poor performance could still indicate a needing replacement.

the inside of a car with its hood open and some wires attached to the engine
the inside of a car with its hood open and some wires attached to the engine
an atv is parked in a garage with the words small checks save big repairs on it
an atv is parked in a garage with the words small checks save big repairs on it
The Future of Powersport Batteries
The Future of Powersport Batteries

Replacing Your Tracker ATV's Battery

Replacing your Tracker ATV's battery is a straightforward process that requires minimal tools and time. Here's a step-by-step guide to replacing your battery safely and effectively.

Before you start, ensure your ATV is turned off and has cooled down to prevent any risk of electrical shock or burns from a hot engine or exhaust.

AD

Gathering Your Tools

To replace your Tracker ATV's battery, you'll need a few tools: a wrench that fits your battery's bolts, a pair of gloves for protection, and possibly a battery charger, if your battery was completely dead.

It's also a good idea to have a soft brush on hand to clean the battery terminals if they're corroded, and a box of baking soda and water to neutralize any acid spills.

Removing the Old Battery

Remove the negative (-) battery cable first, as it's the easier connection to deal with in case of a spark. Then, remove the positive (+) battery cable. Use the wrench to loosen and remove the battery holders, and carefully lift out the old battery.

AD

If your battery is in a sealed box, you may have to remove the screws securing the box before pulling out the battery.

Cleaning the Battery Terminals

Before installing your new battery, take a minute to clean the battery terminals and the area around them. If there's any corrosion, mix a solution of baking soda and water, apply it to the terminals, and scrub gently with a soft brush.

Once cleaned, rinse the area with clean water and dry it thoroughly to prevent any future corrosion.

Installing the New Battery

Position your new battery in place, ensuring it's secure and won't move around. Reconnect the positive (+) battery cable first, followed by the negative (-) cable. Tighten the battery holders securely but don't overtighten.

After reconnection, test your ATV's ignition and accessories to ensure everything works as expected. If your ATV doesn't start, double-check your connections and ensure you've installed the battery correctly.

Finally, schedule regular maintenance checks on your ATV battery to keep it in top shape. Inspect the terminals for any signs of corrosion, and consider using a battery tender or maintainer when your ATV is in storage to keep the battery fully charged and healthy.

AD