von duprin 376t installation instructions

Von Duprin 376T Installation Guide: Step-by-Step Instructions

By Jessica Wilson
AD

The Von Duprin 376T is a versatile, fail-safe electrical release device, ideal for securing classrooms, offices, and other commercial spaces. If you're a business owner, facilities manager, or a professional locksmith, follow this comprehensive guide to install the Von Duprin 376T device seamlessly and safely.

Before we begin, ensure you have the necessary tools: a drill, screwdriver, tape measure, and a level. Also, familiarize yourself with the device's components: the 376T handle set, mortise lock Case, and thevonne duprin 376t installation instructions Manual.

Preparation and Mounting Location

Identify the door and the correct installation side (based on your entrance requirements: one-way, two-way, or  Symptom). Measure and mark the door for the handle set.

AD
Von Duprin Templates
Von Duprin Templates
an open door with instructions to the parts labeled in each section on the front and side
an open door with instructions to the parts labeled in each section on the front and side
various types of brackets and latches for different kinds of doors, including the top to bottom
various types of brackets and latches for different kinds of doors, including the top to bottom

Recommended mounting heights for the Von Duprin 376T are: 36" from the finished floor to the center of the handle, and 64" from the finished floor to the center of the lock case.

Mounting the Faceplate

Hold the faceplate against the door, aligning the edges with your markings. Use a pencil to mark the mounting hole locations through the faceplate's predrilled holes.

One of AMA Security’s engineers fitting a new Vonduprin lock today. Please contact for enquiries
One of AMA Security’s engineers fitting a new Vonduprin lock today. Please contact for enquiries
the instructions for how to install an automatic dryer
the instructions for how to install an automatic dryer
instructions for the doorman's manual
instructions for the doorman's manual

Remove the faceplate and drill 3/8" diameter holes using the marks made. Once drilled, insert the faceplate screws and partial-thread them into the door.

Installing the Mortise Lock Case

With the faceplate securely attached, align the mortise lock case with your previous markings and secure it to the faceplate using the provided screws.

AD

Ensure the lock case is level and properly aligned with the door's edge. Use washers if needed to adjust the fit.

an instruction diagram for the door handle
an instruction diagram for the door handle
Installation Instructions for 83KW/93KW–85KW/95KW IDH Max ...
Installation Instructions for 83KW/93KW–85KW/95KW IDH Max ...
the diagram shows how to install an external door and window in order to allow privacy
the diagram shows how to install an external door and window in order to allow privacy
the diagram shows how to open and un - opening doors with left or right hand
the diagram shows how to open and un - opening doors with left or right hand
instructions on how to install and install the installation method for an overhead wall mounted tv
instructions on how to install and install the installation method for an overhead wall mounted tv
the details of doorset and how to install them
the details of doorset and how to install them

Installing the Latch

The Von Duprin 376T comes with an adjustable latch for various door thicknesses. Adjust the latch according to your door's thickness using the set screw provided.

Insert the jamb paddle and strike into the appropriate side of the door frame, ensuring they align with the latch. Secure them using the provided screws.

AD

Installing the Cylinder/Rim Lockset

Hiw first, determine whether you need a mortise cylinder or rim lockset. Install the chosen option following the manufacturer's instructions.

Entrance door installation
Entrance door installation

Ensure the chosen lockset aligns and operates correctly with the mortise lock case and faceplate.

Installing the Handle Set

Align the handle set with the mortise lock case and faceplate. Insert the short screws through the faceplate and into the handle set clamp plate.

AD

Secure the handle set in place, ensuring it functions smoothly and the latch engages correctly with the jamb paddle and strike.

Upon completion, test the device under various conditions: neutral, emergency, and power supply failure. Ensure it functions as required for failsafe operation. If satisfied, dress the door and frame, and enjoy the enhanced security the Von Duprin 376T offers.

AD